Chalmers & Corner Press Spare Parts

Posted on Friday, August 6th, 2010 By admin

We have had an increasing number of our clients requesting Chalmers and Corner spare parts for presses and press brakes.

We hold a large inventory of spare parts for these Chalmers and Corner presses and press brakes.
We can help you with -

Chalmers & Corner Spare Parts

Air valves
Bushes
Ball adjusting screws and seats
Clutches and brakes (including linings, clutch plates, seals, pistons, springs, hubs)
Clutch keys
Crankshafts
Connecting Rods / Pitments
Drive pins
Tooling
Worm wheels / worm shafts for slide adjustment
Rotary Cam Limit Switches
Lubrication pumps
Barrel assemblies
Tie rods
Beds / Bolsters
Quick Die Change / Die Cushions
Air Cylinders / Surge Tanks
Slide Air Counter balance
Slides / Rams
Slide wear strips
Instruction manuals
Plant acquisition allows us to offer many genuine and reconditioned parts. Additionally, our experience & expertise enables us to manufacture hard to get spare parts to client specification or from our extensive drawing and machine history portfolio, producing quality parts in timely fashion to minimise your equipment down-time.

Chalmers & Corner Service

Revro can service all types of equipment, both large and small, either on-site or at our factory.
Expensive downtime warrants a call to us.
Our client base ranges across Australia, New Zealand, Malaysia, China, Thailand and the Pacific.
We provide emergency breakdown response and routine or preventative maintenance, including comprehensive inspection reporting.

We can remove and re-install your equipment. Additional services include clutch and brake conversions, guillotine blade changes and sharpening, bar cropper repairs, and so on. Revro can design comprehensive, pro-active maintenance programmes for your manufacturing facility or for an individual machine to protect your investment and lengthen its lifespan.

We also have in stock or can manufacture spare parts for a wide range of other manufacturers.
We also have a number of PRESSES for sale.

Vibro Dynamics: Vibration isolation and shock control. Machinery mounts and vibration isolation systems.

Posted on Friday, July 16th, 2010 By admin

Revro is the Australian and New Zealand representative for Vibro Dynamics and their range ofΒ  Machinery mounts and vibration isolation systems for Vibration isolation and shock control.

Since 1964, Vibro/Dynamics Corporation has been the leader and pioneer in the design and manufacture of vibration isolation and shock control systems.

Their Products are designed to effectively reduce transmitted shock and vibration and to provide an adjustment means to precisely level, align, and properly support industrial machinery. Vibro Dynamics and Revro also provide systems that protect machinery and building structures from incoming vibration caused by machinery, railroads, earthquakes, etc.

Whether it’s a heavy blanker or forging hammer disturbing the neighbours, an injection molder or die caster that likes to walk, or equipment or structure that needs protection, Vibro/Dynamics and Revro have the best solution for you!

Elastomer mounts for precision machinery

Elastomer vibration isolation and leveling mounts for precision machinery

Wedge Mounts

Wedge Mounts for Plastic Injection Molders, Die Casters, and Stamping Presses

Isolation Pads

Isolation PadsΒ  for Isolated Foundations Machine Bases and Miscellaneous Use

Coil Spring Mounts

Coil Spring Mounts for HVAC, Seismic and Power Generation Applications

Coil Spring Mounts for Presses

Coil Spring Mounts for Stamping Presses, Isolated Foundations, Construction,
and Forging Applications

Used Machinery: Used Presses, Used Press Brakes, Used Guillotines, Used Feeders

Posted on Friday, July 16th, 2010 By admin

We have a wide selection of used equipment for sale. Some of the equipment we have is below, and if what you are after is not listed please give us a call and we will be happy to help.

Comprehensive Inspection Condition Reports on all machines can be performed if requested.

Stock does change, so please phone to determine availability. A sample of our current stock is pictured but it is not exhaustive. We would welcome the opportunity to supply ex stock or source your requirement via our worldwide contacts.

At Revro, we can perform pre-purchase, pre-removal inspection assessments should you purchase used machinery elsewhere. We can also remove and re-install at your site – anywhere in the world.

Equipment offered is available in a range of conditions – as is, where is, with all faults if any; repaired or modified to meet your requirements; fully reconditioned; reconditioned & modernised; complete with clutch & brake conversions.


Coil Handling

Coil Handling – Clarks Uncoiler and Straightener. Model C1000-3-12. Capacity 1000kg
Coil Handling – Ward Engineering 8 Ton x 48β€³ Uncoiler. 4 leaf mandrel motorized expansion.
Coil Handling – Ward Engineering Ward 8 Ton Coil Car
Coil Handling – PSA Uncoiler Straightener Heavy duty quality unit. Coil capacity 2000kg

Feeders

Feeders – Sesco Inc 22-611 Hydraulic Gripper Feeder
Feeders – P/A Industries Air Slide Feed Model CX3
Feeders – COILMATIC Heavy Duty Air Feed
Feeders – PowAir Model 303HD Heavy Duty Feed (NEW)

Guillotines

Guillotines – John Heine 108B Guillotine 108B – 8ft x 10 gauge

Presses

Presses – Bliss Welded Products Limited 200 Ton Coining Press
Presses – John Heine 202A (x2) and 201A
Presses – John Heine 200A Series 4 Mechanical Press (4 ton capacity)
Presses – John Heine 60A Mechanical Press (8 ton capacity)
Presses – Bliss Welded Products C60-AFC Open Backed Incinable Press (60 ton capacity)
Presses – 2 x Forward Down CA5 Presses 100 ton cap (Mod # S2-100-56-36 Ref # 2167R, 2168R)
Presses – Forward Down CA3 Press 100 ton capacity (Mod # S2-100-36-30 Ref # 2190R)
Presses – John Heine 64A Press
Presses – WG Goetz 15C, Plant Ref 2294R
Presses – JohnΒ  Heine 206A Series 2 Press
Presses – Wallbank 20A 20 Ton Open Fronted Press, Non Geared. Plant Ref 2294R

Press Brakes

Press Brakes – Bliss Welded Products Press Brake 30 Ton (Series 3006) x 2
Press Brakes – Promecam RG-50 Press Brake
Press Brakes – 1999 Komatsu PHS300 300-t press brake

Miscellaneous

Miscellaneous – Aida Press Transfer β€œAutohand” Robots (Model # A8 – 120)
Miscellaneous – Unbrako T-Bolts, Nuts, Strongbacks in Various Sizes
Miscellaneous – Coil Handling Hook 4.5 ton capacity
Miscellaneous – Aida Aida Die Cushion NCY-4-1 (NEW)
Miscellaneous – Aida Aida Die Cushion NCY-8-1 (NEW)
Miscellaneous – Trumpf Nibbler Punch Model # CN 63
Miscellaneous – Forwell RC-800-1600 Quick Die Change Pre Rollers
Miscellaneous – Wilkins and Mitchell Clutch Brake Transmission Assembly
Miscellaneous – Aida Transfer Die (NEW). Suit Aida Model NC2-160 Press or similar SEYI press
Miscellaneous – Grinding Wheels – Norton and Noritake
Miscellaneous – Trennjaeger (Universal Cutting Machine)
Miscellaneous – Birlec Electric Furnace. Type PHW 18.10kW.3 Phase.415V.Max Temp 1000 Cen.
Miscellaneous – Turner Riveter RS5/12 (Riveting machine)
Miscellaneous – Durant Straightener.Model MD6 Serial 173-35E. 6β€³ Cabinet Straightener. Plant Ref 2077R
Miscellaneous – Exacta Model Six OBS Press on stand
Miscellaneous – Macson Slotter
Miscellaneous – Selenium Rectifier. Model 2SR60/15/1 AC Input 240V, DC Output Max 60 Volts

Bliss Welded Products Press Inspection & Removal

Posted on Friday, July 2nd, 2010 By admin

We have recently completed a full press inspection report and removal of a Bliss Welded Products Model S2-250-84-48 (weight 35 tons) and a Bliss Welded Products Model S2-350-84-48 (weight 44 tons).

We removed all power, air supply, clutch and brakes units, guarding and other equipment before the lift and managed cranes and transport.

A challenging site required the removal of the roof to allow for the presses to be lifted out with a 130 ton crane with a 20 ton Frana assisting in an adjacent yard to load on a flat deck for interstate transport.

The 250 ton Bliss Welded Products press was transported interstate and the 350 ton Bliss Welded Products press was transported to the Revro factory to repair the Bliss clutch and brake unit, increase shut height (daylight) by 5″ and manufacture new tie rods to accommodate longer tie rods (to allow common dies to be used during manufacturing).

As a separate project we removed a Wilkins & Mitchell 150 Ton 2 Point Gear Eccentric Press.

RIMG0115 RIMG0116 RIMG0146

Revro Brochure [PDF]   ©   Revro Pty Limited. ABN 48 001 587 186