John Heine Presses, Press Brakes and Guillotines – Refurbished, Used and Spare Parts
Revro is your Australian source for John Heine machinery and parts. We sell refurbished and used John Heine presses, press brakes and guillotines, and we supply, manufacture and remanufacture the spare parts that keep them running. John Heine machines were built to last, and decades on, many are still earning their keep in fabrication shops, toolrooms and production lines across Australia. Whether you’re adding capacity, replacing an ageing machine or chasing one hard-to-find part, we can help.
John Heine Presses
We carry refurbished and used John Heine presses across the full 200-series range, each checked, tagged and ready to work:
- 200A (3 ton) and 201A (8 ton) – compact C-frame and inclinable presses for light stamping and piercing
- 202A (15–17 ton) and 203A (25–30 ton) – the workhorse inclinable and C-frame presses found in most general workshops
- 205A (40–45 ton) and 206A (50–60 ton) – heavier C-frame stamping presses for deeper draws and thicker stock
- 207AG and 207AGF (80 ton) – the largest geared and friction-clutch models, including pneumatic die-cushion variants
We work across Series 2, Series 3 and Series 4 builds in C-frame, gap-frame and inclinable configurations, with key clutch, friction clutch and geared drives.
John Heine Press Brakes
John Heine press brakes remain a reliable choice for sheet metal bending and forming. We supply refurbished and used mechanical and treadle-operated press brakes, as well as press brake and guillotine combination machines for shops that need shearing and bending from a single footprint. Every machine is inspected and rebuilt to original tolerances, with modern guarding and electrical controls fitted where required.
John Heine Guillotines
For accurate, repeatable sheet metal shearing, John Heine guillotines are hard to beat. We stock refurbished and used machines across the range, including:
- 21B treadle guillotine – manual, foot-operated shearing for light-gauge work
- 48B and 48BP Series 2 – geared power guillotine shears for heavier-gauge cutting
- 108B geared power guillotine – higher-capacity power shearing for production environments
We also supply replacement guillotine blades to suit the 108 and 118 series and other John Heine models, ground and ready to fit.
John Heine Spare Parts
Most John Heine repairs come down to a handful of high-wear components. We hold spare parts both in stock and manufacture to original specification across presses, press brakes and guillotines:
- Clutch and brake parts – friction clutch assemblies, clutch plates, linings, seals, pistons, springs and hubs
- Slide and ram components – gibs, slide adjustment screws, ram nuts, ball seats and knock-out bars
- Drivetrain parts – flywheels, crankshafts and eccentrics, connecting rods, pitman arms, pinions and gears
- Bushings and bearings – bronze bushes, main bearings and replacement bushings to original tolerances
- Guillotine parts – top and bottom shear blades, hold-down and clamp components, back gauges and return springs
- Press brake parts – top and bottom tooling, ram gibs, return springs and back-gauge components
- Controls and guarding – foot treadle and pedal mechanisms, drive belts and guarding components
If the part you need isn’t listed, ask. With original drawings, a sample component or the model and series number, we can reverse-engineer and remanufacture John Heine parts that are no longer commercially available.
Why Buy John Heine from Revro
A correctly specified part or a properly refurbished machine gets a proven press, brake or guillotine into production fast, at a fraction of the cost of new imported equipment. Our team understands the metric and imperial quirks across the John Heine range, the differences between Series 2, 3 and 4 builds, and how to match a machine or part to your exact requirement – not a close-enough guess. We sell and supply Australia-wide, hold and manufacture parts to client specification, and can advise on whether to refurbish, replace or upgrade.
Get in Touch
Looking to buy a refurbished or used John Heine press, press brake or guillotine, sell one, or track down a spare part? Tell us the model, what you need, and ideally a photo. We’ll confirm availability, condition, lead time and price. Contact Revro today.