Posted on Friday, January 14th, 2011 By
adminS2-300-84-48
Serial # 1481A, Revro Plant # 2497R
Good condition, complete Erwin Sick electronic guard (front) & mechanically interlocked (rear).
Die cushions.
Press Load monitoring
Strokes per minute
Unisorb anti vibration feet fitting to press
20 strokes per minute
Bed size 84 x 48ā€¯
12ā€¯ stroke
21ā€¯ Shut height
Full instruction manual available
Press is being dismantled for sale and transport interstate or overseas.
We can supply labour and materials to install and commission regardless of location.
Price on application.
Posted on Friday, September 17th, 2010 By
adminWe recently completed a full recondition of a Bliss Welded Products 250 Ton Clutch Brake Flywheel Micro Inch Assembly. Included dismantling, replacing anti-friction bearings, clutch brake drive pins, clutch brake driving plates and friction linings, new drive keys, new rotary extension shaft & hat seal, repairs to clutch hub, repair damaged components, re-assembled and static test unit on bench.
Posted on Friday, January 15th, 2010 By
adminSlide/Ram Removal (Bliss Welded Products Press).
Our client required the replacement of synthetic wear strips and machining of steel gibs for their 140 Ton 2 Point Gear Eccentric Press, as guiding and alignment to slide / ram to bolster was excessive causing end product issues. Revro personnel removed the slide/ram using overhead crane and chain blocks.
Work undertaken in Revro workshop
- Removal of the old wear strips and replace with new synthetic wear strips which are oil filled (self lubricating) and can run at zero clearance.
- Removed, machined and replaced existing steel gibs
- Checked all working components including slide adjustment mechanism on the slide / ram
- Assembled at Revro works for transport
Installed on Site
The slide was re-installed on site, clearances set between wear strips and gibs. Parallelism slide to bed/bolster to within 0.002″ (0.05mm).
Machine test run, all tested and machine put back into production.
Ram Before Refurbishment
Ram After Refurbishment
Old and tired gibs
Gibs after machining
Exhausted Wear Strips
New Synthetic Wear Strips
