John Heine Spare Parts

We have had an increasing number of our clients requesting John Heine spare parts (ball screws, connecting rods, bushes, clutch keys, clutch springs, clutch inserts, banjos, air valves, gibs, slides, crankshafts, brakes, feeding equipment spares,etc.

We hold a large inventory of spare parts for these John Heine presses, press brakes and guillotines.

Plant acquisition allows us to offer many genuine and reconditioned parts. Additionally, our experience & expertise enables us to manufacture hard to get spare parts to client specification or from our extensive drawing and machine history portfolio, producing quality parts in timely fashion to minimise your equipment down-time.

We also have in stock or can manufacture spare parts for a wide range of other manufacturers.

We also have a number of John Heine Presses for sale.

Desch Clutch Recondition – Planox PMF 143 & PP Series Clutches

We have recently reconditioned 2 x Desch Clutches (Planox PMF143 & PP/PPF112 Series Pneumatic Clutches).

Included the removal of the clutches from the machinery, stripping and reconditioning at the Revro factory and assembly to the existing machinery.

We sell, service and provide spare parts for a wide range of clutches for the metal working and mining industries.

Learn more about clutches >>

Guillotine Blade Sharpening & Fitting

Sharp guillotine blades are essential to ensure a high tolerance cutting job.

New Guillotine & Coil Slitting Blades

We have supplied our clients with new guillotine blades to suit a wide range of manufacturers including John Heine, Amada, Pearson, Kleen, YSD, Acrashear, Fisher, Durma, Pacific, AP Lever, Avik, Cincinnati, Promecam, Hydracut, Edwards and more.

Precision Grinding & Sharpening -

We also offer a comprehensive precision grinding and sharpening service as well as a complete blade removal and installation services.

We ensure close tolerancing and consistent heat treating to provide unsurpassed cutting performance.

Guillotine Blade Sharpening & Fitting

Guillotine Blade Sharpening & Fitting

Press Slide Replacement Wear Strips – 140 Ton 2 Point Gear Eccentric Press (Bliss Welded Products)

Slide/Ram Removal (Bliss Welded Products Press).

Our client required the replacement of synthetic wear strips and machining of steel gibs for their 140 Ton 2 Point Gear Eccentric Press, as guiding and alignment to slide / ram to bolster was excessive causing end product issues. Revro personnel removed the slide/ram using overhead crane and chain blocks.

Work undertaken in Revro workshop

• Removal of the old wear strips and replace with new synthetic wear strips which are oil filled (self lubricating) and can run at zero clearance.
• Removed, machined and replaced existing steel gibs
• Checked all working components including slide adjustment mechanism on the slide / ram
• Assembled at Revro works for transport

Installed on Site

The slide was re-installed on site, clearances set between wear strips and gibs. Parallelism slide to bed/bolster to within 0.002″ (0.05mm).

Machine test run, all tested and machine put back into production.

Ram Before Refurbishment

Ram After Refurbishment

Old and tired gibs

Gibs after machining

Exhausted Wear Strips

New Synthetic Wear Strips