Vibro Dynamics: Vibration isolation and shock control. Machinery mounts and vibration isolation systems.

Posted on Friday, July 16th, 2010 By admin

Revro is the Australian and New Zealand representative for Vibro Dynamics and their range ofΒ  Machinery mounts and vibration isolation systems for Vibration isolation and shock control.

Since 1964, Vibro/Dynamics Corporation has been the leader and pioneer in the design and manufacture of vibration isolation and shock control systems.

Their Products are designed to effectively reduce transmitted shock and vibration and to provide an adjustment means to precisely level, align, and properly support industrial machinery. Vibro Dynamics and Revro also provide systems that protect machinery and building structures from incoming vibration caused by machinery, railroads, earthquakes, etc.

Whether it’s a heavy blanker or forging hammer disturbing the neighbours, an injection molder or die caster that likes to walk, or equipment or structure that needs protection, Vibro/Dynamics and Revro have the best solution for you!

Elastomer mounts for precision machinery

Elastomer vibration isolation and leveling mounts for precision machinery

Wedge Mounts

Wedge Mounts for Plastic Injection Molders, Die Casters, and Stamping Presses

Isolation Pads

Isolation PadsΒ  for Isolated Foundations Machine Bases and Miscellaneous Use

Coil Spring Mounts

Coil Spring Mounts for HVAC, Seismic and Power Generation Applications

Coil Spring Mounts for Presses

Coil Spring Mounts for Stamping Presses, Isolated Foundations, Construction,
and Forging Applications

Used Machinery: Used Presses, Used Press Brakes, Used Guillotines, Used Feeders

Posted on Friday, July 16th, 2010 By admin

We have a wide selection of used equipment for sale. Some of the equipment we have is below, and if what you are after is not listed please give us a call and we will be happy to help.

Comprehensive Inspection Condition Reports on all machines can be performed if requested.

Stock does change, so please phone to determine availability. A sample of our current stock is pictured but it is not exhaustive. We would welcome the opportunity to supply ex stock or source your requirement via our worldwide contacts.

At Revro, we can perform pre-purchase, pre-removal inspection assessments should you purchase used machinery elsewhere. We can also remove and re-install at your site – anywhere in the world.

Equipment offered is available in a range of conditions – as is, where is, with all faults if any; repaired or modified to meet your requirements; fully reconditioned; reconditioned & modernised; complete with clutch & brake conversions.

Coil Handling

Coil Handling – Clarks Uncoiler and Straightener. Model C1000-3-12. Capacity 1000kg
Coil Handling – Ward Engineering 8 Ton x 48β€³ Uncoiler. 4 leaf mandrel motorized expansion.
Coil Handling – Ward Engineering Ward 8 Ton Coil Car
Coil Handling – PSA Uncoiler Straightener Heavy duty quality unit. Coil capacity 2000kg


Feeders – Sesco Inc 22-611 Hydraulic Gripper Feeder
Feeders – P/A Industries Air Slide Feed Model CX3
Feeders – COILMATIC Heavy Duty Air Feed
Feeders – PowAir Model 303HD Heavy Duty Feed (NEW)


Guillotines – John Heine 108B Guillotine 108B – 8ft x 10 gauge


Presses – Bliss Welded Products Limited 200 Ton Coining Press
Presses – John Heine 202A (x2) and 201A
Presses – John Heine 200A Series 4 Mechanical Press (4 ton capacity)
Presses – John Heine 60A Mechanical Press (8 ton capacity)
Presses – Bliss Welded Products C60-AFC Open Backed Incinable Press (60 ton capacity)
Presses – 2 x Forward Down CA5 Presses 100 ton cap (Mod # S2-100-56-36 Ref # 2167R, 2168R)
Presses – Forward Down CA3 Press 100 ton capacity (Mod # S2-100-36-30 Ref # 2190R)
Presses – John Heine 64A Press
Presses – WG Goetz 15C, Plant Ref 2294R
Presses – JohnΒ  Heine 206A Series 2 Press
Presses – Wallbank 20A 20 Ton Open Fronted Press, Non Geared. Plant Ref 2294R

Press Brakes

Press Brakes – Bliss Welded Products Press Brake 30 Ton (Series 3006) x 2
Press Brakes – Promecam RG-50 Press Brake
Press Brakes – 1999 Komatsu PHS300 300-t press brake


Miscellaneous – Aida Press Transfer β€œAutohand” Robots (Model # A8 – 120)
Miscellaneous – Unbrako T-Bolts, Nuts, Strongbacks in Various Sizes
Miscellaneous – Coil Handling Hook 4.5 ton capacity
Miscellaneous – Aida Aida Die Cushion NCY-4-1 (NEW)
Miscellaneous – Aida Aida Die Cushion NCY-8-1 (NEW)
Miscellaneous – Trumpf Nibbler Punch Model # CN 63
Miscellaneous – Forwell RC-800-1600 Quick Die Change Pre Rollers
Miscellaneous – Wilkins and Mitchell Clutch Brake Transmission Assembly
Miscellaneous – Aida Transfer Die (NEW). Suit Aida Model NC2-160 Press or similar SEYI press
Miscellaneous – Grinding Wheels – Norton and Noritake
Miscellaneous – Trennjaeger (Universal Cutting Machine)
Miscellaneous – Birlec Electric Furnace. Type PHW 18.10kW.3 Phase.415V.Max Temp 1000 Cen.
Miscellaneous – Turner Riveter RS5/12 (Riveting machine)
Miscellaneous – Durant Straightener.Model MD6 Serial 173-35E. 6β€³ Cabinet Straightener. Plant Ref 2077R
Miscellaneous – Exacta Model Six OBS Press on stand
Miscellaneous – Macson Slotter
Miscellaneous – Selenium Rectifier. Model 2SR60/15/1 AC Input 240V, DC Output Max 60 Volts

Pearson Press Brake Removal

Posted on Wednesday, December 16th, 2009 By admin
We relocated a 155 Ton 16 ft bed and slide Pearson Press Brake from our clients works in NSW, for sale and relocation in Tasmania. Work included press inspection, dismantling, crane lift, road transport on step deck truck to Melbourne via truck ferry transport to Tasmania.
Pearson Removal

155 Ton (16ft bed and table) Pearson Press Brake Removal

Removal of Pearson Press Brake using 25 ton Franna Crane

Removal of Pearson Press Brake using 25 ton Franna Crane

Pearson Press Brake loaded onto a Step Deck truck for interstate (Sydney to Tasmania) relocation

Pearson Press Brake loaded onto a Step Deck truck for interstate (Sydney to Tasmania) relocation

Revro Brochure [PDF]   ©   Revro Pty Limited. ABN 48 001 587 186