300 Ton Bliss Welded Products straight sided double crank Press For Sale

Posted on Friday, January 14th, 2011 By admin

S2-300-84-48

Serial # 1481A, Revro Plant # 2497R

Good condition, complete Erwin Sick electronic guard (front) & mechanically interlocked (rear).

Die cushions.

Press Load monitoring

Strokes per minute

Unisorb anti vibration feet fitting to press

20 strokes per minute

Bed size 84 x 48”

12” stroke

21” Shut height

Full instruction manual available

Press is being dismantled for sale and transport interstate or overseas.

We can supply labour and materials to install and commission regardless of location.

Price on application.

Bliss Welded Products PressBliss Welded Products Press2Bliss Welded Products Press 3

Chalmers & Corner Press Spare Parts

Posted on Friday, August 6th, 2010 By admin

We have had an increasing number of our clients requesting Chalmers and Corner spare parts for presses and press brakes.

We hold a large inventory of spare parts for these Chalmers and Corner presses and press brakes.
We can help you with -

Chalmers & Corner Spare Parts

Air valves
Bushes
Ball adjusting screws and seats
Clutches and brakes (including linings, clutch plates, seals, pistons, springs, hubs)
Clutch keys
Crankshafts
Connecting Rods / Pitments
Drive pins
Tooling
Worm wheels / worm shafts for slide adjustment
Rotary Cam Limit Switches
Lubrication pumps
Barrel assemblies
Tie rods
Beds / Bolsters
Quick Die Change / Die Cushions
Air Cylinders / Surge Tanks
Slide Air Counter balance
Slides / Rams
Slide wear strips
Instruction manuals
Plant acquisition allows us to offer many genuine and reconditioned parts. Additionally, our experience & expertise enables us to manufacture hard to get spare parts to client specification or from our extensive drawing and machine history portfolio, producing quality parts in timely fashion to minimise your equipment down-time.

Chalmers & Corner Service

Revro can service all types of equipment, both large and small, either on-site or at our factory.
Expensive downtime warrants a call to us.
Our client base ranges across Australia, New Zealand, Malaysia, China, Thailand and the Pacific.
We provide emergency breakdown response and routine or preventative maintenance, including comprehensive inspection reporting.

We can remove and re-install your equipment. Additional services include clutch and brake conversions, guillotine blade changes and sharpening, bar cropper repairs, and so on. Revro can design comprehensive, pro-active maintenance programmes for your manufacturing facility or for an individual machine to protect your investment and lengthen its lifespan.

We also have in stock or can manufacture spare parts for a wide range of other manufacturers.
We also have a number of PRESSES for sale.

Used Machinery: Used Presses, Used Press Brakes, Used Guillotines, Used Feeders

Posted on Friday, July 16th, 2010 By admin

We have a wide selection of used equipment for sale. Some of the equipment we have is below, and if what you are after is not listed please give us a call and we will be happy to help.

Comprehensive Inspection Condition Reports on all machines can be performed if requested.

Stock does change, so please phone to determine availability. A sample of our current stock is pictured but it is not exhaustive. We would welcome the opportunity to supply ex stock or source your requirement via our worldwide contacts.

At Revro, we can perform pre-purchase, pre-removal inspection assessments should you purchase used machinery elsewhere. We can also remove and re-install at your site – anywhere in the world.

Equipment offered is available in a range of conditions – as is, where is, with all faults if any; repaired or modified to meet your requirements; fully reconditioned; reconditioned & modernised; complete with clutch & brake conversions.


Coil Handling

Coil Handling – Clarks Uncoiler and Straightener. Model C1000-3-12. Capacity 1000kg
Coil Handling – Ward Engineering 8 Ton x 48β€³ Uncoiler. 4 leaf mandrel motorized expansion.
Coil Handling – Ward Engineering Ward 8 Ton Coil Car
Coil Handling – PSA Uncoiler Straightener Heavy duty quality unit. Coil capacity 2000kg

Feeders

Feeders – Sesco Inc 22-611 Hydraulic Gripper Feeder
Feeders – P/A Industries Air Slide Feed Model CX3
Feeders – COILMATIC Heavy Duty Air Feed
Feeders – PowAir Model 303HD Heavy Duty Feed (NEW)

Guillotines

Guillotines – John Heine 108B Guillotine 108B – 8ft x 10 gauge

Presses

Presses – Bliss Welded Products Limited 200 Ton Coining Press
Presses – John Heine 202A (x2) and 201A
Presses – John Heine 200A Series 4 Mechanical Press (4 ton capacity)
Presses – John Heine 60A Mechanical Press (8 ton capacity)
Presses – Bliss Welded Products C60-AFC Open Backed Incinable Press (60 ton capacity)
Presses – 2 x Forward Down CA5 Presses 100 ton cap (Mod # S2-100-56-36 Ref # 2167R, 2168R)
Presses – Forward Down CA3 Press 100 ton capacity (Mod # S2-100-36-30 Ref # 2190R)
Presses – John Heine 64A Press
Presses – WG Goetz 15C, Plant Ref 2294R
Presses – JohnΒ  Heine 206A Series 2 Press
Presses – Wallbank 20A 20 Ton Open Fronted Press, Non Geared. Plant Ref 2294R

Press Brakes

Press Brakes – Bliss Welded Products Press Brake 30 Ton (Series 3006) x 2
Press Brakes – Promecam RG-50 Press Brake
Press Brakes – 1999 Komatsu PHS300 300-t press brake

Miscellaneous

Miscellaneous – Aida Press Transfer β€œAutohand” Robots (Model # A8 – 120)
Miscellaneous – Unbrako T-Bolts, Nuts, Strongbacks in Various Sizes
Miscellaneous – Coil Handling Hook 4.5 ton capacity
Miscellaneous – Aida Aida Die Cushion NCY-4-1 (NEW)
Miscellaneous – Aida Aida Die Cushion NCY-8-1 (NEW)
Miscellaneous – Trumpf Nibbler Punch Model # CN 63
Miscellaneous – Forwell RC-800-1600 Quick Die Change Pre Rollers
Miscellaneous – Wilkins and Mitchell Clutch Brake Transmission Assembly
Miscellaneous – Aida Transfer Die (NEW). Suit Aida Model NC2-160 Press or similar SEYI press
Miscellaneous – Grinding Wheels – Norton and Noritake
Miscellaneous – Trennjaeger (Universal Cutting Machine)
Miscellaneous – Birlec Electric Furnace. Type PHW 18.10kW.3 Phase.415V.Max Temp 1000 Cen.
Miscellaneous – Turner Riveter RS5/12 (Riveting machine)
Miscellaneous – Durant Straightener.Model MD6 Serial 173-35E. 6β€³ Cabinet Straightener. Plant Ref 2077R
Miscellaneous – Exacta Model Six OBS Press on stand
Miscellaneous – Macson Slotter
Miscellaneous – Selenium Rectifier. Model 2SR60/15/1 AC Input 240V, DC Output Max 60 Volts

John Heine Spare Parts

Posted on Wednesday, June 23rd, 2010 By admin

We have had an increasing number of our clients requesting John Heine spare parts (ball screws, connecting rods, bushes, clutch keys, clutch springs, clutch inserts, banjos, air valves, gibs, slides, crankshafts, brakes, feeding equipment spares,etc.

We hold a large inventory of spare parts for these John Heine presses, press brakes and guillotines.

Plant acquisition allows us to offer many genuine and reconditioned parts. Additionally, our experience & expertise enables us to manufacture hard to get spare parts to client specification or from our extensive drawing and machine history portfolio, producing quality parts in timely fashion to minimise your equipment down-time.

We also have in stock or can manufacture spare parts for a wide range of other manufacturers.

We also have a number of John Heine Presses for sale.

Revro Brochure [PDF]   ©   Revro Pty Limited. ABN 48 001 587 186